News

NEWS CENTER

News<p>NEWS CENTER</p>

Nanxiang News

Basic information of flat twin screw extruder

Flat twin-screw extruder is widely used for filling, blending, modification, reinforcement, devolatilization of chlorinated polypropylene and superabsorbent resin of rubber, plastic and engineering resin. Extrusion of degradable masterbatch, polycondensation of polyamide and polyaddition of polyurethane; Granulation of carbon powder and magnetic powder, preparation of cable insulation materials, sheath materials, low smoke and low halogen flame retardant PVC cable materials and various silane crosslinking materials, etc.

View Details

01 2022-11

What are the advantages of flat twin screw extruder?

Flat twin screw extruder is widely used in various industries, so its use is certainly very extensive. It can also be seen in many industries. Moreover, the flat twin-screw extruder adopts side feeding technology, which improves the integrity of the material and greatly increases the output. The position and shape of the feed port also have a great influence on the feed efficiency.

View Details

20 2022-10

Flat twin screw extruder operation matters needing attention?

The friction and calorific value formed during the extrusion and melting of the resin by the flat twin-screw extruder is less. In fact, when the resin is melted in the barrel of the twin-screw extruder, the meshing and shearing effect of the twin-screw is stable and balanced, so the raw materials are mixed and melted. The following is a note on the operation of the lower flat twin screw extruder?

View Details

10 2022-10

Use details of flat twin screw extruder

Flat twin screw extruder manufacturers on equipment maintenance. 1. First, rinse the cooling channel with acid. The water-cooled extruder barrel, like all heat exchangers, is a heat exchanger whose channels are prone to fouling and failure. Many people have noticed that the cooling performance of the new extruder is much better than that of the three-or four-year extruder. The old machinery adheres to the inner surface of the channel, producing scale and affecting the heat transfer efficiency.

View Details

29 2022-09

Flat twin screw extruder scope of application

Flat twin-screw extruder is widely used in rubber, plastic and engineering resin filling, blending, modification, strengthening, chlorinated polypropylene and high water-absorbent resin dewave treatment; Degradable base material extrusion, polyamide polycondensation, polyurethane polymer carbon powder, magnetic powder granulation, cable insulation materials, sheath materials, low smoke and low halogen flame retardant PVC cable materials and various silane crosslinking materials preparation.

View Details

19 2022-09

How does a flat twin-screw extruder work?

Flat twin-screw extruder, also called parallel twin-screw extruder, is an experimental equipment for large-scale production and research and development. It has a wide range of uses and can process various materials. The following is about the working principle of the parallel twin screw extruder and its aspect ratio.

View Details

09 2022-09

< 123456 > proceed page